✔️ 30mm Heavy Duty Rubber  |  ✔️ EN 13893 / R10 Certified  |  ✔️ CE & REACH

The premium heavy duty rubber gym flooring specification — 30mm, 1,000+ kg/m³ density, 200kg+ drop rated, 90% impact absorption, 85% noise reduction. The tile used in the most demanding commercial gym, CrossFit and Olympic lifting environments across the UK.

Why Choose These Tiles?

• ✅ 1,000+ kg/m³ — the highest density in our gym tile range
• ✅ 200kg+ drop rating — the most demanding training environments covered
• ✅ 90% impact absorption, 85% noise reduction — maximum performance specs
• ✅ EN 13893 + CE + REACH — full commercial certification
• ✅ Available 1m² and 500mm — largest and most flexible format options in our range

How Many Tiles Do You Need?

1m² tiles: tile count = floor area m² + 10%. 500mm tiles: floor area × 4 + 10%.

✔️ Free UK mainland delivery on all orders. Same-day dispatch before 2pm.

Complete Range

• 16mm Tiles — general weights areas
• 20mm Tiles — heavy free weights, CrossFit
• 30mm Tiles — Olympic lifting, 200kg+ drops

Frequently Asked Questions

Q: What makes rubber gym flooring 'heavy duty' and how do I know these tiles qualify?
A: Heavy duty rubber gym flooring is defined by density and thickness. These tiles are 30mm thick at 1,000+ kg/m³ density — the specification threshold for commercial gym applications. Below 800 kg/m³ and 20mm, tiles are considered light duty. The 200kg+ drop rating and EN 13893 certification provide objective confirmation of heavy duty classification.

Q: What is the maximum weight or impact load these 30mm tiles can handle?
A: 200kg+ drop rating — this is the tested threshold for vertical impact load. The 90% impact absorption means the tile absorbs the majority of that energy without transmitting it to the subfloor. In practice, this covers all free weight training applications from beginner to elite athlete.

Q: How does 30mm rubber flooring compare to 20mm or 15mm alternatives?
A: Thickness directly determines impact absorption and noise reduction performance. 30mm provides 90% impact absorption and 85% noise reduction. 20mm typically delivers 70–75% and 15mm around 50–60%. For any gym use involving barbell drops, deadlifts, or Olympic lifting, 30mm is the specification that actually protects the subfloor and reduces noise to acceptable levels.

Q: Is this rubber gym flooring suitable for installation over wooden floors or suspended floors?
A: These tiles are suitable for concrete, screed, and hard flooring. Installation over suspended timber floors requires careful consideration — the 30mm rubber provides significant impact dampening but a structural engineer should assess whether the timber subfloor can withstand the point loads from heavy racks and equipment. For basement slab or ground-floor concrete, direct installation is standard.

Q: How do I maintain and clean heavy duty rubber gym flooring?
A: Sweep or vacuum regularly to remove grit and debris. Mop with a pH-neutral, low-foam cleaner diluted in water. Avoid solvent-based cleaners and bleach, which can degrade rubber compound over time. For gyms with chalk use, a slightly damp mop removes chalk residue effectively. Inspect joins quarterly and re-seat any lifted tile edges.

Q: Can I order these tiles to cover an awkward-shaped room with alcoves or pillars?
A: Yes. The 1000mm × 1000mm tiles and 500mm × 500mm tiles are both cuttable with a sharp utility knife. Alcoves, pillars, and irregular wall lines are handled by cutting tiles to fit at the perimeter. The combination of both tile sizes minimises waste in rooms with complex shapes.